<DIV>When collecting bite and pieces of information about H-89 on the net, I came across<BR>this note from some folks:</DIV>  <DIV>*****************************************************************************************************<BR>"The base H-89 had no graphic modes, just 33 graphic characters. At least two different<BR>add-on boards were created that gave the H-89 bitmapped graphics capabilities, but <BR>I'm pretty sure they both required hardware modifications to tie them in to the <BR>terminal board - this was not a simple plug-in expansion card." ...</DIV>  <DIV>&nbsp;</DIV>  <DIV>"There's a 3rd party graphics board fitted on top of the CRT (seriously). <BR>It links into the PSU/video cableform from the Terminal logic board to<BR>the monitor, and also into 8 of the RAM chip sockets on the CPU board.<BR>The RAMs you pull to plug in the cables go into the graphics board, <BR>which contains another 16K of RAM as a bitmapped display buffer." ...</DIV> 
 <DIV>&nbsp;</DIV>  <DIV>"OK, the manual says 'Micronex Pixelplotter Graphics on the Z89/RFI <BR>computer'. It also says 'Micronex Limited, Harford Square, Chew Magna, <BR>Bristol, England'. I've got the installation instructions and memory maps.<BR>The thing contains 16K of RAM which is bank-switched with 16K of the <BR>normal memory. I think my board uses port F2H, bit 3 to select the new <BR>16K, but I'm not absolutely sure." ...<BR>***************************************************************************************************</DIV>  <DIV>Has any of our SEBHC folks been familiar with any graphics add-on<BR>feature for H-89 system?</DIV>  <DIV><BR>ziloo</DIV><p>&#32;
      <hr size=1><a href="http://us.rd.yahoo.com/evt=48250/*http://searchmarketing.yahoo.com/arp/sponsoredsearch_v9.php?o=US2226&cmp=Yahoo&ctv=AprNI&s=Y&s2=EM&b=50">Pinpoint customers </a>who are looking for what you sell.