[sebhc] Z-100 upgrade modules (ZMAX memory upgrade and ZCLK clock) available

Lee Hart leeahart at earthlink.net
Sat Apr 15 11:30:12 CDT 2006


>> The 2nd item is a ZMAX - Z100 motherboard memory maximizer kit by Rick
>> Pegg and produced and marketed by Graymatter Applications Software.
>> Works only with later module Z-100 motherboards, does include written
>> instructions for the modifications, the 6 specialized chips required
>> and 27 (3 banks x 9 ICs per bank) 256K bit D-RAMS. Gives you a wacking
>> 768K bytes of memory!  You can also use the 32K RAM chips you remove
>> to upgrade the video system (instructions included).

Z-100's often came with 32k RAMs in the video board; they were really
64k RAMs that had a bad bit, and so were sold cheap. When you replaced
the 64k RAMs with 256k, you could move the old 64k RAMs to the video
board to get double the video memory. There were a few programs that
could use this extra memory.

Dan Lanciani wrote:
> Interesting; what are the 6 specialized chips?  We used to do this
> with one multiplexor (74LS157?) and a bent pin on the memory decode
> PAL.  Older machines needed a newer monitor ROM as well.

Technically, all you needed were the RAMs and the multiplexer. But it
took a lot of cuts and patches to do it that way. The various kits
provided the extra parts to make the upgrade easier.
-- 
Ring the bells that still can ring
Forget the perfect offering
There is a crack in everything
That's how the light gets in    --    Leonard Cohen
--
Lee A. Hart, 814 8th Ave N, Sartell MN 56377, leeahart_at_earthlink.net
--
Delivered by the SEBHC Mailing List



More information about the Sebhc mailing list