[sebhc] PIP

[Jack Rubin]

For building an H8/89 version of modem7, start here:
http://www.retroarchive.org/cpm/cdrom/CPM/MODEMS/MODEM7/M7H8-2-1.ASM

Jack

--- Mark Garlanger <garlangr at verizon.net> wrote:
> Assuming random distribution, you would be looking
> at 40 locations per 10k
> of
> code - seems like a lot to keep track of.
> It may be even more command since the opcode for
> that byte
> is LDAX   D
> 
> It seems like the easiest would be to get some type
> of modem program that
> support X-Modem transfers.
> 
>             Mark
> 
> 
> 
> ----- Original Message ----- 
> From: "Dwight K. Elvey" <dwight.elvey at amd.com>
> To: <sebhc at sebhc.org>
> Sent: Thursday, July 15, 2004 6:40 PM
> Subject: Re: [sebhc] PIP
> 
> 
> > Hi
> > Another thought. If you have soemthing like XTree
> > on your PC, you can edit the binary file to remove
> > the 026 and keep track of where they are.
> >  Once you get it to the H8, use DDT to re-edit it
> > and save to a file. I'm not sure how many 026's
> > you have in the file.
> > Dwight
> >
> >
> > >From: "Dwight K. Elvey" <dwight.elvey at amd.com>
> > >
> > >>From: "Carroll Waddell"
> <CarrollWaddell at sc.rr.com>
> > >>>
> > >>I have my old CP/M programs stored as images on
> a PC. These are binary
> > >>(object) images. I'm trying to use PIP to create
> a file on my H8 from
> > >>the PC.  The only thing I have been able to
> transfer so far are ASCII
> > >>files. When I try to transfer a COM file (first
> is MBASIC.COM) it stops
> > >>at the first Control Z (026).  According to my
> CP/M book, you can
> > >>specify an input as an object file [O].  The
> book I have says that PIP
> > >>also monitors the keyboard so that you can end
> the transfer by pressing
> > >>Ctrl Z, but PIP is ignoring the keyboard. The
> book also says that you
> > >>can tell PIP to quit copying when it encounters
> a certain string which
> > >>you can specify followed by Ctrl Z. I haven't
> been able to make that
> > >>work either. In summary, I'm simply trying to
> transfer all my old CP/M
> > >>programs from the hard drive on my PC to a 10
> hard sector diskette. So
> > >>far, no joy.
> > >>Carroll
> > >
> > >Hi Carroll
> > > My understanding is that there is no way to read
> an input as
> > >binary into a file. You can write binary to a
> file.
> > > You can convert the file to intel hex and then
> use something
> > >like ddt, load or some other conversion program
> and then save to disk.
> > > There is some utility, somewhere that will do
> this as well.
> > > Of course, if my image writing tool were working
> for you,
> > >you could use my WRCPM to write the data to an
> image and then
> > >transfer it to the H8. I still haven't found time
> to look at
> > >the image you sent me to see if you have an issue
> reading or
> > >writing.
> > >Dwight
> > >
> > >
> > >--
> > >Delivered by the SEBHC Mailing List
> sebhc-request at sebhc.org.
> > >
> >
> >
> > --
> > Delivered by the SEBHC Mailing List
> sebhc-request at sebhc.org.
> 
> --
> Delivered by the SEBHC Mailing List
> sebhc-request at sebhc.org.
> 

--
Delivered by the SEBHC Mailing List