[sebhc] H-11

[Dwight Elvey]

>From: "Mark Garlanger" <garlangr at verizon.net>
>
>I have a Spring/Summer 1982 catalog, but it doesn't show any pictures of the
>boards, the list of boards that I see are:
>
>WHA-11-16 32K Byte Expansion Module
>H-11-5 Serial Interface Kit
>H-11-2 Parallel Interface
>H-11-10 Wire Wrapping Board

Hi
 Now if I could correlate these to DEC numbers I'd have it. Does
anyone in the group have an H-11 that they could peak under the covers?
Dwight

>
>The only other hardware items that I see for the H11 are:
>830-35 - Line Time Clock Switch Modification Kit ( places the LTC switch on
>the front panel)
>H-11-6 Extended Arithmetic Chip - adds fixed point mult, div, and extended
>shifts. (40 pin IC).
>
>Mark
>
>
>-----Original Message-----
>From: sebhc-bounces at sebhc.org [mailto:sebhc-bounces at sebhc.org] On Behalf Of
>Barry Watzman
>Sent: Wednesday, January 04, 2006 6:09 PM
>To: sebhc at sebhc.org
>Subject: RE: [sebhc] H-11
>
>I don't have that information.  Sorry.  The CPU card should be obvious, as
>should memory cards.  If you have an old (VERY old) Heath catalog, you may
>be able to identify it from photos in the catalog.
>
>
>-----Original Message-----
>From: sebhc-bounces at sebhc.org [mailto:sebhc-bounces at sebhc.org] On Behalf Of
>Dwight Elvey
>Sent: Wednesday, January 04, 2006 6:21 PM
>To: sebhc at sebhc.org
>Subject: RE: [sebhc] H-11
>
>Hi Barry
> I'll need the part numbers found on the ears?
>I wouldn't know a serial card from a cpu card for
>one of these.
>Dwight
>
>>From: "Barry Watzman" <Watzman at neo.rr.com>
>>
>>CPU, memory (possibly several), I/O cards (serial and/or parallel), Floppy
>>disk controller (H-27).
>>
>>The H-27 controller is really a parallel interface card, the "real"
>>controller was in the drive box.
>>
>>Barry Watzman
>>
>>
>>-----Original Message-----
>>From: sebhc-bounces at sebhc.org [mailto:sebhc-bounces at sebhc.org] On Behalf Of
>>Dwight Elvey
>>Sent: Wednesday, January 04, 2006 5:34 PM
>>To: sebhc at sebhc.org
>>Subject: [sebhc] H-11
>>
>>Hi
>> I've gotten a couple of H-11 boxes. One has three
>>boards in and the other has none. Does anyone know
>>what boards were normally configured with the H-11?
>>Thanks
>>Dwight
>>
>>
>>--
>>Delivered by the SEBHC Mailing List
>>
>>
>>--
>>Delivered by the SEBHC Mailing List
>
>
>--
>Delivered by the SEBHC Mailing List
>
>
>--
>Delivered by the SEBHC Mailing List
>
>--
>Delivered by the SEBHC Mailing List


--
Delivered by the SEBHC Mailing List