[sebhc] SUCCESS

[Jack Rubin]

That's really great - it's what sebhc is about - people helping each
other.

> -----Original Message-----
> From: sebhc at sebhc.org [mailto:sebhc at sebhc.org] On Behalf Of 
> Carroll Waddell
> Sent: Saturday, June 12, 2004 6:26 PM
> To: sebhc at sebhc.org
> Subject: Re: [sebhc] SUCCESS
> 
> 
> My thanks go to Walter Moore who sent me  a drive and an HDOS 
> boot diskette. Lee Hart is sending me a CPM boot diskette. I 
> have a lot of CPM software 
> when I get to the point that I can use it again.
> To fix the controller board, I used a scope and the troubleshooting 
> pages in the manual that you sent me. It led me straight to U10. Read 
> data was going into the chip, but nothing was coming out.
> I'm still going to try Dwight's uploader program. I've been 
> working with 
> him for several days. At least, now I know my drive system 
> works. Carroll
> 
> Jack Rubin wrote:
> 
> >fantastic!
> >did you use a physical boot disk or were you able to use Dwight's 
> >uploader program? how did you trouble shoot your problems with U10?
> >
> >Jack
> >
> >  
> >
> >>-----Original Message-----
> >>From: sebhc at sebhc.org [mailto:sebhc at sebhc.org] On Behalf Of
> >>Carroll Waddell
> >>Sent: Saturday, June 12, 2004 4:22 PM
> >>To: sebhc at staunch89er.com
> >>Subject: [sebhc] SUCCESS
> >>
> >>
> >>I just got HDOS to boot on my H8. I've found out the
> >>following: 1. You don't need the H17 ROM or RAM chips on the 
> >>controller board. 2. XCON8 contains the H17 ROM code which it 
> >>relocates to 030.000 where 
> >>it should be.
> >>3. An H17 controller card won't work with a defective U10 
> >>chip. Carroll
> >>
> >>--
> >>Delivered by the SEBHC Mailing List
> sebhc-request at sebhc.org.
> >>
> >>    
> >>
> >
> >--
> >Delivered by the SEBHC Mailing List
> >
> >  
> >
> 

--
Delivered by the SEBHC Mailing List